Case Power Kit

Home > Eurorack > Case Power Kit

Case Power Kit

Your Price:$159.99

In Stock

Part Number:K-M-CP

Power Output - Choose One

Power Entry

Brick

Additional Noise Filtering Distribution Board Kits

Molex Power Cable (If using Noise-Filtering Distribution Board)

6 inch Molex Power Cable [+$5.99]

12 inch Molex Power Cable [+$6.49]

18 inch Molex Power Cable [+$6.99]

12 inch Molex Adapter Cable [+$4.99]

Quantity

Description
Customer Reviews
Video 1

Case Power is a marriage of the 5A Power Supply System (now further regulating the +12V rail) and the Noise Filtering Distribution board, resulting in a love child called Case Power. It is safe, clean, quiet, and will power small and large Eurorack systems. Connecting Case Power to your current bus board system is easy with molex or spade connectors. We have 3U or 1U power entry panels available, but Case power doesn't have to take up valuable HP space; you can wire a jack, LED and switch into your case and easily attach them to the board.

Features:

Advanced low-noise, fully regulated voltage converters on each rail
Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
Noise filtering capacitors are placed in two sections on the board to help minimize module to module noise
Eighteen 16-pin Eurorack power connections, keyed for safety
Molex connector for daisy chaining Synthrotek distribution/bus boards
Spade connectors for connecting other manufacturers’ bus boards
Screw clamp headers for power entry wiring and daisy-chaining an additional Case Power
Multiple power options to fit your needs and budget:

BLUE: +12V @ 3A, -12V @ 2.5A, +5V @ 1.5A
GREEN: +12V @ 3A, -12V @ 1.3A, +5V @ 1.5A
RED: +12V @ 2A, -12V @ 500mA, +5V @ 1.5A

LED status indicator for each rail (+12V, -12V, +5V)
Protective cover over converters
Eight mounting holes for screwing into your case (spacers and screws included)
Optional 1U or 3U backlit Eurorack panels with on/off switch (2.1mm barrel)
Screw clamp headers for power entry wiring and daisy-chaining an additional Case Power
Fits an 84HP case or larger
Dimensions: 14? x 1? (37.8 x 3.5cm) height: 22mm (spacers add 3mm)

Requires a 16-19V 90W center-positive power brick (sold separately). The brick does not plug directly into Case Power; you will either need to wire the board into your case or use a Power Panel.

Download a Drill Template to mount it in your own case!

Important Links

Product Page
Store Page
Assembly Instructions
Bill of Materials
Manual
Capacitor and Resistor Lookup Guide