This product has been discontinued.
Synthrotek's "super-slim" Eurorack Power Supply System is designed to give you maximum power in a small, elegant package. This product boasts more than twice as much power as other similarly priced products!
The option of 3U at 4 HP or 1U at 6 HP power entry panels makes this system easy to integrate into any professional or DIY case. For maximum flexibility, this power supply kicks out all 3 rails (-12, +12, +5) with adequate power for a medium-sized case. There are 4 mounting holes on the perimeter of the PC board.
Ideal for 3X84HP and beyond (make sure to consult the owner's manuals of your modules in order to make sure you are not trying to pull more amps than are available with this power supply). 12V 5A power supply required to operate this product (can be purchased as an option above). Comes with 2 feet of both red and black 16-gauge stranded hookup wire (more can be purchased if needed as an option above).
Please note: This listing is for the PCB ONLY. If you wish to purchase a kit or a completed unit, you can find them at the bottom of the page.
When purchased with optional 12V 5A power brick/desktop power supply:
+12 @ 2.2A
-12 @ 1.3A
+5 @ 1.5A
Some specs:
Input Voltage Range: +12VDC +/-5%
Output Voltage: +12VDC / -12VDC / +5VDC
Max Output Current +12V:
+/- 5% regulation
2.2A Max
84% efficiency
Short Circuit Protection
FCC Class B
EN55022 Class B
Max Output Current -12V:
+/- 1% regulation
1.3A Max
84.5% efficiency
Extensive self-protection shut down features
Certified to UL 60950-1, CAN/CSA-C22.2 No.
60950-1, IEC60950-1, EN60950-1 safety approvals,
2nd edition
Max Output Current +5V:
+/- 4% regulation
1.5A Max
90.5% efficiency
Short Circuit Protection
PCB Dimensions: 4 1/16'' x 1 5/8''
Important note about the power supply brick:
- Power connector must have a 5.5mm sleeve and a 2.5mm interior barrel pin
- Power supply must be 12VDC, 5A and have a center positive pin
- Using an incorrect power supply will void any warranty on this product. Other power bricks may work just fine, but we cannot guarantee them.
Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.
