Attention: This is just the PCB and panel! Check out the Bill of Materials link at the bottom of the page for a list of the parts you will need.
The Synthrotek Verb is a reverb module like no other. This PT2399 unit offers a warm tape-saturated spring reverb sound, but the added flair of subtle modulation truly makes it shine. The input gain knob drops the input amount back to give cathedral-like sounds when the mix is high. Turn the modulation knob manually for pitch bends; patch in a slow LFO or envelope CV to emulate pitch bends reminiscent of a tape echo with a broken capstan. The mix knob is a very fast-responding cross fader circuit which allows audio rate inputs for further FM-like modulation. Add a subtle amount of reverb or crank the mix past 3 o'clock to knock the reverb signal into the rails.Features:
- CV in over MOD and MIX
- Buffered Input and Output
- CV In for the MIX is additive to the knob.
- Very low signal DC offset at -0.073V
- Trimmer to adjust input gain.
- Current Draw:
- 18mA @ -12V
- 87mA @ +12V
- 0mA @ +5V
- Width: 4hp
- Depth: 54mm ( 2.13in )