<![CDATA[Synthrotek: ]]> https://store.synthrotek.com Wed, 7 Oct 2026 00:00:00 EST en-us <![CDATA[Single Turn Trimmer Pot]]> https://store.synthrotek.com/Single-Turn-Trimmer-Pot_p_404.html Wed, 7 Oct 2026 00:00:00 EST Trimmer potentiometers are small variable resistors which are used in circuits for tuning and (re)calibration. Single turn trim pots are used where a resolution of one turn is sufficient. They are the most cost effective variable resistors available....[Read More]
Our Price: $0.50 [Add to Cart]


]]> https://store.synthrotek.com/Single-Turn-Trimmer-Pot_p_404.html Trimmer potentiometers are small variable resistors which are used in circuits for tuning and (re)calibration. Single turn trim pots are used where a resolution of one turn is sufficient. They are the most cost effective variable resistors available....[Read More]
Our Price: $0.50 [Add to Cart]


]]> Trimmer potentiometers are small variable resistors which are used in circuits for tuning and (re)calibration. Single turn trim pots are used where a resolution of one turn is sufficient. They are the most cost effective variable resistors available. All values listed are linear. ]]> <![CDATA[Multi Turn Trimmer Pot]]> https://store.synthrotek.com/Multi-Turn-Trimmer-Pot_p_405.html Wed, 7 Oct 2026 00:00:00 EST Trimmer potentiometers are small variable resistors which are used in circuits for tuning and (re)calibration. Multi turn trim pots are used where higher adjustment resolutions are needed. Our multi turn trim pots are 25 turn, worm-gear pots. All val...[Read More]
Our Price: $0.75 [Add to Cart]


]]> https://store.synthrotek.com/Multi-Turn-Trimmer-Pot_p_405.html Trimmer potentiometers are small variable resistors which are used in circuits for tuning and (re)calibration. Multi turn trim pots are used where higher adjustment resolutions are needed. Our multi turn trim pots are 25 turn, worm-gear pots. All val...[Read More]
Our Price: $0.75 [Add to Cart]


]]> Trimmer potentiometers are small variable resistors which are used in circuits for tuning and (re)calibration. Multi turn trim pots are used where higher adjustment resolutions are needed. Our multi turn trim pots are 25 turn, worm-gear pots. All values listed are linear. ]]> <![CDATA[16mm Potentiometer]]> https://store.synthrotek.com/16mm-Potentiometer_p_421.html Wed, 7 Oct 2026 00:00:00 EST 16mm Potentiometers as used in our guitar pedals. With a variety of ohm resistance to choose from, you also have the option to choose between 'B' (Linear Taper) or 'A' (Audio, or Logarithmic Taper). A linear taper potentiometer increases in a linear ...[Read More]
Our Price: $1.25 [Add to Cart]


]]> https://store.synthrotek.com/16mm-Potentiometer_p_421.html 16mm Potentiometers as used in our guitar pedals. With a variety of ohm resistance to choose from, you also have the option to choose between 'B' (Linear Taper) or 'A' (Audio, or Logarithmic Taper). A linear taper potentiometer increases in a linear ...[Read More]
Our Price: $1.25 [Add to Cart]


]]> <![CDATA[B10K Slide Pot]]> https://store.synthrotek.com/B10K-Slide-Pot_p_639.html Wed, 7 Oct 2026 00:00:00 EST B10K Slide Pot Sliding Potentiometers. 20mm travel distance, with built-in amber LEDs. Further information and details can be found via the data sheet HERE. ...[Read More]
Our Price: $2.99 [Add to Cart]


]]> https://store.synthrotek.com/B10K-Slide-Pot_p_639.html B10K Slide Pot Sliding Potentiometers. 20mm travel distance, with built-in amber LEDs. Further information and details can be found via the data sheet HERE. ...[Read More]
Our Price: $2.99 [Add to Cart]


]]>
Further information and details can be found via the data sheet HERE.
]]> <![CDATA[Nylon Potentiometer Spacer - Pack of 5]]> https://store.synthrotek.com/Nylon-Potentiometer-Spacer--Pack-of-5_p_644.html Wed, 7 Oct 2026 00:00:00 EST We had these nylon potentiometer spacers custom made to close the spacing gap between 9mm pots and 3.5mm vertical mount jacks on our Eurorack modules. They make a completed module look very clean. They can also be used in other projects, such as the ...[Read More]
Our Price: $1.25 [Add to Cart]


]]> https://store.synthrotek.com/Nylon-Potentiometer-Spacer--Pack-of-5_p_644.html We had these nylon potentiometer spacers custom made to close the spacing gap between 9mm pots and 3.5mm vertical mount jacks on our Eurorack modules. They make a completed module look very clean. They can also be used in other projects, such as the ...[Read More]
Our Price: $1.25 [Add to Cart]


]]> We had these nylon potentiometer spacers custom made to close the spacing gap between 9mm pots and 3.5mm vertical mount jacks on our Eurorack modules. They make a completed module look very clean. They can also be used in other projects, such as the AstroNoise Eurorack Mod. Comes in a pack of 5.

Inside diameter : 7.1mm
Outside diameter : 10mm
Thickness : 1.83mm
Color: off-white
]]> <![CDATA[9mm Side-Mount Potentiometers]]> https://store.synthrotek.com/9mm-Side-Mount-Potentiometers_p_648.html Wed, 7 Oct 2026 00:00:00 EST 9mm knurled or solid shaft potentiometer. Overall shaft length is 15mm.CLICK HERE to download datasheet. ...[Read More]
Our Price: $1.30 [Add to Cart]


]]> https://store.synthrotek.com/9mm-Side-Mount-Potentiometers_p_648.html 9mm knurled or solid shaft potentiometer. Overall shaft length is 15mm.CLICK HERE to download datasheet. ...[Read More]
Our Price: $1.30 [Add to Cart]


]]> 9mm knurled or solid shaft potentiometer. Overall shaft length is 15mm.

CLICK HERE to download datasheet.

]]> <![CDATA[9mm Vertical Potentiometers]]> https://store.synthrotek.com/9mm-Vertical-Potentiometers_p_649.html Wed, 7 Oct 2026 00:00:00 EST 9mm knurled or solid shaft potentiometer. Overall length is 15mm from top of shaft to the bottom of the PCB-mount pins. CLICK HERE to download datasheet. ...[Read More]
Our Price: $1.30 [Add to Cart]


]]> https://store.synthrotek.com/9mm-Vertical-Potentiometers_p_649.html 9mm knurled or solid shaft potentiometer. Overall length is 15mm from top of shaft to the bottom of the PCB-mount pins. CLICK HERE to download datasheet. ...[Read More]
Our Price: $1.30 [Add to Cart]


]]> 9mm knurled or solid shaft potentiometer. Overall length is 15mm from top of shaft to the bottom of the PCB-mount pins.

CLICK HERE to download datasheet.

]]> <![CDATA[Tall Vertical Potentiometers (Tall Pots)]]> https://store.synthrotek.com/Tall-Vertical-Potentiometers-Tall-Pots_p_712.html Wed, 7 Oct 2026 00:00:00 EST A Synthrotek original, these tall vertical potentiometers (or tall pots) were designed specifically for use in guitar pedals. They are tall enough to be PCB-mounted alongside a 3PDT switch and still clear through the top of an aluminum case (see pict...[Read More]
Our Price: $1.25 On Sale [Add to Cart]


]]> https://store.synthrotek.com/Tall-Vertical-Potentiometers-Tall-Pots_p_712.html A Synthrotek original, these tall vertical potentiometers (or tall pots) were designed specifically for use in guitar pedals. They are tall enough to be PCB-mounted alongside a 3PDT switch and still clear through the top of an aluminum case (see pict...[Read More]
Our Price: $1.25 On Sale [Add to Cart]


]]> A Synthrotek original, these tall vertical potentiometers (or "tall pots") were designed specifically for use in guitar pedals. They are tall enough to be PCB-mounted alongside a 3PDT switch and still clear through the top of an aluminum case (see picture). They are also handy in board-mounted projects going in 1590DD aluminum cases since the tops of the cases can vary widely in thickness.

Overall length is 31mm from top of shaft to the bottom of the PCB-mount pins. The threads are 10mm tall.

View the Synthrotek tall pot data sheet here.

]]> <![CDATA[9mm Plastic Shaft Potentiometer]]> https://store.synthrotek.com/9mm-Plastic-Shaft-Potentiometer_p_785.html Wed, 7 Oct 2026 00:00:00 EST These pots have the same footprint as Alpha/Synthrotek metal shaft pots, but with a longer shaft. They are knurled with a white pointer, so they don't need any knobs. They are suitable for many different Eurorack projects. .05W20% Tolerance ...[Read More]
Our Price: $0.89 [Add to Cart]


]]> https://store.synthrotek.com/9mm-Plastic-Shaft-Potentiometer_p_785.html These pots have the same footprint as Alpha/Synthrotek metal shaft pots, but with a longer shaft. They are knurled with a white pointer, so they don't need any knobs. They are suitable for many different Eurorack projects. .05W20% Tolerance ...[Read More]
Our Price: $0.89 [Add to Cart]


]]> These pots have the same footprint as Alpha/Synthrotek metal shaft pots, but with a longer shaft. They are knurled with a white pointer, so they don't need any knobs. They are suitable for many different Eurorack projects.

  • .05W
  • 20% Tolerance


]]> <![CDATA[Short Plastic Shaft Pots]]> https://store.synthrotek.com/Short-Plastic-Shaft-Pots_p_1078.html Wed, 7 Oct 2026 00:00:00 EST These pots have the same footprint as Alpha/Synthrotek metal shaft pots, but with a short 7mm shaft. They are a bluish-purple with a white pointer, so they don't need any knobs. These pots are used in the Division 6 Business Card Synthesizer. 0.05W20...[Read More]
Our Price: $0.99 [Add to Cart]


]]> https://store.synthrotek.com/Short-Plastic-Shaft-Pots_p_1078.html These pots have the same footprint as Alpha/Synthrotek metal shaft pots, but with a short 7mm shaft. They are a bluish-purple with a white pointer, so they don't need any knobs. These pots are used in the Division 6 Business Card Synthesizer. 0.05W20...[Read More]
Our Price: $0.99 [Add to Cart]


]]> These pots have the same footprint as Alpha/Synthrotek metal shaft pots, but with a short 7mm shaft. They are a bluish-purple with a white pointer, so they don't need any knobs.

These pots are used in the Division 6 Business Card Synthesizer.
  • 0.05W
  • 20% Tolerance
]]> <![CDATA[9mm Vertical Dual Gang Potentiometer]]> https://store.synthrotek.com/9mm-Vertical-Dual-Gang-Potentiometer_p_1079.html Wed, 7 Oct 2026 00:00:00 EST 9mm solid shaft dual gang potentiometer. Overall length is 15mm from top of shaft to the bottom of the PCB-mount pins.CLICK HERE to download the data sheet. ...[Read More]
Our Price: $2.49 [Add to Cart]


]]> https://store.synthrotek.com/9mm-Vertical-Dual-Gang-Potentiometer_p_1079.html 9mm solid shaft dual gang potentiometer. Overall length is 15mm from top of shaft to the bottom of the PCB-mount pins.CLICK HERE to download the data sheet. ...[Read More]
Our Price: $2.49 [Add to Cart]


]]> 9mm solid shaft dual gang potentiometer. Overall length is 15mm from top of shaft to the bottom of the PCB-mount pins.

CLICK HERE to download the data sheet.
]]>