The Cosmic ECHO is super easy to DIY! With a painted and pre-drilled case, it's a great beginner-to-intermediate soldering project!
The Cosmic ECHO is an analog-sounding LoFi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. Our take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Zone and Warp.
- Dark, rich sounds with the analog vibe of a tape echo.
- Uses the PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.
- Delay length: 30ms-1,250ms
- 3 knobs: Feedback, Mix and Rate. The Mix is a wet-only control that attenuates the amount of delayed signal in the signal chain. The Rate controls the number of repeats in an organic-sounding way.
- Warp button: Momentary pushbutton switch that gives a bright, "small speaker" tone.
- Zone button: Momentary pushbutton switch that introduces feedback into the circuit momentarily. Great for adding rhythmic feedback and other strange sounds. The Zone amount can be adjusted by an internal trim pot.
- Pedal may have a slight volume drop.
- Great for shoegaze, surf rock, ambient and experimental sounds.
- Pedal uses a 125B case
- Dimensions (L x W x H): 4 7/8" x 2 5/8" x 2 3/16" (124mm x 67mm x 56mm).
- Takes a 9V battery or 9V center negative 2.1mm barrel power supply (not included).